You have no items in your shopping cart.
Product Description
APPLICATION DATA
These motors are built for dependable operation in 4" diameter or larger water wells. Continuous rating in 86°F (30°C) water. Rotation: Single phase, CCW facing shaft end; three phase electrically reversible.
BASIC FEATURES
■ Corrosion-Resistant All Stainless Steel Exterior Construction
■ Stainless Steel Splined Shaft
■ Hermetically-Sealed Windings
■ Anti-Track Self-Healing Resin System
■ Water Lubrication
■ Filter Check Valve
■ Kingsbury-Type Thrust Bearing
■ Pressure Equalizing Diaphragm
■ Built-In Lightning Arrestors (all single-phase; 200 and 230 volt three-phase)
■ Removable "Water-Bloc" Lead Installed In North American 60 Hz Water Well Motors.
■ UL 778 Recognized (North American Voltages)
■ CSA Certified
■ ANSI/NSF 61 Certified
■ NEMA Mounting Dimensions
SPECIAL FEATURES
■ No flow inducer sleeve required in water up to 86°F (30°C) for motors through 2 Hp.
■ Two-wire motors are split-phase designs with integral starting components and on-winding thermal overload protection, and do not require a control box. They feature FRANKLIN'S patented 2-wire BIAC starting switch which provides reverse impact torque to aid starting in adverse environments.
■ Three-wire 60 Hz motors 1/3 - 1 Hp use FRANKLIN'S exclusive 3-wire QD (Quick-Disconnect) Control Box with the patented QD Relay. This relay provides the ultimate in operational life.
These motors are built for dependable operation in 4" diameter or larger water wells. Continuous rating in 86°F (30°C) water. Rotation: Single phase, CCW facing shaft end; three phase electrically reversible.
BASIC FEATURES
■ Corrosion-Resistant All Stainless Steel Exterior Construction
■ Stainless Steel Splined Shaft
■ Hermetically-Sealed Windings
■ Anti-Track Self-Healing Resin System
■ Water Lubrication
■ Filter Check Valve
■ Kingsbury-Type Thrust Bearing
■ Pressure Equalizing Diaphragm
■ Built-In Lightning Arrestors (all single-phase; 200 and 230 volt three-phase)
■ Removable "Water-Bloc" Lead Installed In North American 60 Hz Water Well Motors.
■ UL 778 Recognized (North American Voltages)
■ CSA Certified
■ ANSI/NSF 61 Certified
■ NEMA Mounting Dimensions
SPECIAL FEATURES
■ No flow inducer sleeve required in water up to 86°F (30°C) for motors through 2 Hp.
■ Two-wire motors are split-phase designs with integral starting components and on-winding thermal overload protection, and do not require a control box. They feature FRANKLIN'S patented 2-wire BIAC starting switch which provides reverse impact torque to aid starting in adverse environments.
■ Three-wire 60 Hz motors 1/3 - 1 Hp use FRANKLIN'S exclusive 3-wire QD (Quick-Disconnect) Control Box with the patented QD Relay. This relay provides the ultimate in operational life.
Additional Information
| GPM Efficiency Rating | N/A |
| HP Rating | N/A |
| Phase | N/A |
| Voltage | N/A |
| GPM | N/A |
Product Tags
Add Your Tags:
Use spaces to separate tags. Use single quotes (') for phrases.
