You're currently on:

• Home
• /
• Irrigation Pumps
• /
• Goulds GT20 - Goulds Pumps IRRI-GATOR Centrifugal Irrigation & Transfer Pump - 2 HP

• • The product Goulds GT15 - Goulds Pumps IRRI-GATOR Centrifugal Irrigation Pump - 1.5 HP has been added to comparison list.
  • The product Goulds GT15 - Goulds Pumps IRRI-GATOR Centrifugal Irrigation Pump - 1.5 HP has been added to comparison list.
  • The product Goulds GT20 - Goulds Pumps IRRI-GATOR Centrifugal Irrigation & Transfer Pump - 2 HP has been added to comparison list.

Double click on above image to view full picture

Goulds GT20 - Goulds Pumps IRRI-GATOR Centrifugal Irrigation & Transfer Pump - 2 HP

Model Number: GT20

Be the first to review this product

Availability: In stock or can be ordered

$419.00

Add Items to Cart

Qty: Add to Cart

OR

• Add to Wishlist
• | Add to Compare

Quick Overview

2 HP Goulds Irrigator Pump

230 volt

Applications

Lawn sprinkling

Irrigation

Air conditioning systems

Heat pumps

Water transfer

Dewatering

Product Description

General Pump Specifications:

1 1/2" NPT suction

1 1/2" NPT discharge

upto 110 GPM at 5 foot lift

Reprime capabilities: to 25 feet suction lift.

Maximum working pressure: 125 PSIG

Maximum water temperature: 140°F

Motor Specifications:

NEMA standard open drip proof

60 Hz

3500 RPM

Stainless steel shaft

3/4 - 1 1/2 HP are selectable between 115 or 230 volt

2 and 3 HP are 230 volt only

Built-in overload protection with automatic reset

Self-Priming Design

Once pump is primed it never needs priming again even if water level drops below the end of the suction pipe. Pumping resumes once the water level rises above the end of the suction pipe.

Serviceable

Back pullout design allows disassembly of pump for service without disturbing piping. Two compartment motor for easy access to motor wiring and replaceable components.

Reliable

Bolt down diffuser provides positive alignment with impeller. Diffuser also has stainless wear ring for extended performance in abrasive conditions. Diffuser is F.D.A. compliant, injection molded, food grade, glass filled Lexan®

Self-Priming Design

Once pump is primed it never needs priming again even if water level drops below the end of the suction pipe. Pumping resumes once the water level rises above the end of the suction pipe.

QUALITY

Cast iron construction featuring a 4 bolt, back pull-out design. Tapped openings provided for easy attachement of vacuum gauges and a casing drain.

Pump ratings are within the motor manufacturers recommended working limits and can be operated continuously without damage.

Additional Information

GPM Efficiency Rating	N/A
HP Rating	N/A
Phase	N/A
Voltage	N/A
GPM	N/A

Product Tags

Add Your Tags:

Add Tags

Use spaces to separate tags. Use single quotes (') for phrases.