Goulds HSJ Pump Specifications

FEATURES

■ High Capacity and Pressure: Specifically designed to deliver high capacities at greater pressures.
■ Stainless Steel Pump Shaft: Hex design provides positive drive for impellers and eliminates clearance adjustments.
■ Easy to Service: Can be taken apart for service by removing four bolts.
■ Corrosion Resistant: Glass filled thermoplastic impellers. Stainless steel wear rings and coverplates. Electrocoat paint process applied inside and out and then baked on.
■ Powered for Continuous Operation: Pump is designed for continuous operation. All ratings are within the motor manufacturer’s recommended working limits.
■ Convertible: Designed for use on shallow or deep well applications using appropriate Goulds Pumps fittings. See the performance charts on the following pages for fitting order numbers.

SPECIFICATIONS

Pump:
• Pipe connections:
1¼" NPT suction, 1" NPT discharge,
1" NPT drive (pressure).
• Pressure switch:
¾ – 1½ HP, AS4; 2 HP, AS10,
both preset (30-50 PSI).

Motor:
• NEMA standard.
• ¾-1½ HP – 115/230 V
• 2 HP – 230 V only
• 60 Hz, capacitor start.
• Single phase, 3500 RPM.
• Built-in overload with automatic reset.
• Stainless steel shaft.
• Rotation: clockwise when viewed from motor end.
• Maximum temperature: 140ºF.

SYSTEM COMPONENTS

■ Basic Pump Unit: Includes pump, motor, pressure switch, tubing, fittings, pressure gauge and bushing.
■ Shallow Well Package: Includes adapter, nozzle, venturi, bolts, gasket and pipe plugs.
■ Deep Well Jet Assembly Package: Twin Pipe
includes: jet body, nozzle, venturi and foot valve.
Packer includes: jet body with built-in check valve, nozzle and venturi.

Additional Accessories Required:
• Packer System – well casing adapter AWJ2 (2") and turned coupling 64655 or AWCJ3 (3").
• For Deep Well Systems – a pressure control valve such as an AV22KIT or AV22 plus a JDW tubing kit.