SPECIFICATIONS

Pump:
• Pipe connections:
1¼" NPT suction
1" NPT discharge
1" NPT drive (pressure).
• Pressure switch: AS4 preset at 30-50 PSI.

Motor:
• NEMA standard.
• 60 Hz.
• ½ – 1½ HP, 115/230 V capacitor start.
• Single phase.
• 3500 RPM.
• Built-in overload with automatic reset.
• Stainless steel shaft.
• Rotation: clockwise when viewed from motor end.
• UL778 listed.
Maximum temperature: 140°F.

System Components

Basic Pump Unit:
Includes pump and motor, pressure gauge and bushing, pressure switch with tubing and fittings.

Shallow Well Package:
Includes shallow well adapter, nozzle, venturi (diffuser), gasket, bolts and pipe plugs

FEATURES
■ Convertible: May be used on shallow or deep well applications using appropriate Goulds Pumps fittings.
■ Serviceable:
• Back pullout design for service without disturbing piping.
• Two compartment motor for access to wiring and replaceable components.
• Nozzle clean out plug in shallow well adapter.
• Corrosion resistant, plastic tubing and fittings are easily removed for cleaning. Premium O-ring design fittings need only be hand tight to seal.
■ Impeller: F.D.A. compliant, glass filled Noryl®. Corrosion and abrasion resistant.
■ Diffuser (Guidevane): Bolt down Lexan® diffuser has stainless wear ring for extended performance in abrasive conditions.
■ Powered for Continuous Operation: Pump ratings are within the motor manu-facturer’s recommended working limits. Can be operated continuously without damage.
■ Corrosion Resistant: Electro-coat paint is baked on.
■ Protected Mechanical Seal: Diaphragm retains water in the casing to ensure the mechanical seal can never run dry.
■ Excellent Air Handling Ability: After initial priming the pump has the ability to re-prime itself.